The Void - (Empty lightsaber)
Almost every part of it is 100% scratch made, and none of it is unmodified in some way.
Going over the details from top to bottom.
The shroud tip is etched with a jedi logo.
The blade plug is turned to look like a real emitter of power, burned clean by the heat of the blade.
The M3 thumbscrew has been re-machined to be sleek and not interrupt the flow of the hilt.
The emitter has a brass detail ring, and vents for shine though light when installed.
The entire shroud piece is made up of one part, with many layer and details taken and machined back to work with the chamber with lies underneath. The entire shroud is also acid washed to contrast the polished feel of the rest of the hilt.
The crystal chamber is made from brass, with detailed rings and slots for crystal visibility, and a deep channel hidden inside the back for switch and connection wires.
The switch plate 'floats' behind the chamber and has lots of small details. It holds 2 x momentary tactile switches.
The midsection has smoothed ridges to allow for a nice feel when wielding.
The under core is totally etched with a hexagonal pattern, then added circuitry details on top.
The bottom core has a hidden twist and lock, with adjustable tightness. This allows the grip to be removed without tools.
The pommel is made up of 2 additional parts. The aluminium base, and the brass cap, which features low profile sound venting to be aesthetically pleasing.
The covertec wheel is scratch made from brass.
Every piece of this hilt has been individually machined, weathered, detailed and polished.
Internal Diameter: 1 inch throughout.
2 x momentary switches are included with the hilt.
This hilt is supplied EMPTY so you can install your own electronics.
Blade not included.
All items are posted with full insurance and tracking.
If you have any questions or would like more pictures, please don’t hesitate to ask.